AZ Carbide writes for More Woodturning Magazine
Read the entire article here!
https://www.morewoodturningmagazine.com/reviews.php?reviewsid=23&access=c84eac04dd8e
“Woodturning: Can I Do It with Carbide”
This YouTube series of 3 videos by SJWoodWorks will answer many questions about carbide tools…describes most cutter shapes with demo turnings of each. Checkout the SJWoodWorks channel on YouTube focused primarily on carbide lathe tools.
Part 1 of 3: Introduction of tools & spindle turning demo.
Part 2 of 3: Turning a goblet with carbide tools & end grain hollowing.
Part 3 of 3: Turning a bowl with carbide tools & face grain hollowing.
Keep Track of Dull Edges by Coloring Them
Found this in Dec. 2014 issue of Woodworker’s Journal.
How to Accept Carbide Cutters on Sorby TurnMaster Tools
If you own one of the Sorby Turn Master tools, or are considering purchasing one, this video will show a quick change you can make so that a greater variety of carbide insert cutter styles can be used.
The change is adding a slight countersink to the top of the mounting hole on the tool head. With this change many more cutter styles can be used on the TurnMaster.
The 15mm round, square, radius and large diamond insert cutters available from AZ Carbide can now be mounted on the TurnMaster.
