Ron Campbell Pro-Series Bar

• No International shipments of this product
• 5/8 Stainless Steel bar
• 15.25 inches long
• Pro-Series will come with appropriate Torx screw.  Much more difficult to strip
• Made to be a companion to the Pro-Series AXE™ Handle
• Slides into the. handle 6 inches for weight, balance, strength helping to eliminate vibration and chatter.
• Tang for the bar is 6 inches allowing  9 inches beyond the Pro-Series handle. Additional length to work beyond the tool rest.
• Pro-Series will come with two cutters the AZR1 and the AZR2 flat top cutters
• The bar has a fastener hole to accommodate the screw to fit all the cutters. Yes one screw size only.
• Both Hogger cutters are aggressive cutters.   These cutters are going to give you the very best in clean shear cup cutting and quick removal of wood.  Hogger cutters should be used by the most experienced turners only.  Use only in a shear cutting action, never flat.

Creating new cutters for this bar is what makes it much more unique than any other bars.   We have designed all new cutters for this tool.  All the cutters below use the same size screw and it is a torx head making it much more difficult to strip out unlike Allen wrenches.  With this tool you can use the following cutters:

1. AZP1 a 12 mm cutter for beginner and intermediate
2. AZPR2 a 16 mm cutter for the beginner and intermediate
3. AZS2 a 15 mm cutter for the beginner and intermediate
4. Hogger 10 that comes with the bar.  Use only in the shear cutting angle
5. Hogger 12 that comes with the bar.  Use only in shear cutting angle

Other cutters are in work. With the purchase of this bar entitles you to be a member of the AZ Carbide Ron Campbell Pro-Series club.  This will entitle you to a 10% discount on all the Pro-Series cutters listed above.   Buy both the bar and the Pro-Series AXE™ handle and get 15% off the same cutters.   Team member discount good for 1 year from date of purchase. Keep in mind there will be more cutters forthcoming.